Ikei Systèmes
ikei

Automated nutrient balancing for hydroponics

Your nutrient solution, balanced automatically.

Ikei measures potassium, calcium and nitrate right in your reservoir, then adds exactly the fertilizer that's missing. No dumping and remixing. No waiting a week for lab results.

  • Developed at McGill University
  • Within 10% of lab gold standard in farm tests
  • Patented sensor technology
  • $400K CAD in grants
Reservoir B · ion profile Illustrative data
K+
258 ppmin range
Ca2+
120 ppmlow
NO3−
188 ppm Nin range
Next step: dose Ca(NO3)2 Sample → Calculate → Dose

$400K CADin grants and awards to date

  • McGill Innovation Fund
  • NSERC Idea to Innovation
  • Chwang-Seto Fellowship
  • Axelys PSO Award
  • Steven Pal Family Award

The problem

Plants use up nutrients unevenly.

As crops grow, they take some nutrients faster than others. The solution slowly drifts out of balance. Left alone, a severe imbalance can wipe out the harvest.

The EC meter can't see it

EC tells you how much is dissolved in the water, not what. Calcium can run low while potassium piles up, and the EC reading stays the same.

Illustrative comparison: equal-height nutrient stacks with the same EC reading. Balanced and drifted nutrient compositions with the same EC reading. Labels appear centered inside the nutrient blocks only, and the drifted composition is highlighted red.

Today's fixes are slow and wasteful

Dump and remix

At the first sign of trouble, growers throw out the whole solution and mix a new batch.

Wastes water, fertilizer and labour

Send samples to a lab

Weekly tests, then staff read the report and adjust the tank by hand. By the time results come back, the solution has already moved.

Up to $50,000 in testing fees, plus skilled labour

How it works

One small system. A loop that never stops.

The Ikei balancer sits next to your reservoir and repeats three steps on its own.

1

Sample

It draws water from the reservoir and measures potassium, calcium and nitrate on-site.

2

Calculate

It compares the result to your target recipe and works out exactly what's missing.

3

Dose

Pumps add just the right fertilizer to bring the solution back on target. Then it starts again.

Illustration of a hydroponic grow table with a nutrient reservoir underneath, connected by sample and dosing lines to the Ikei balancer and three stock-solution bottles
Illustration of our automatic nutrient balancer system.
Ikei nutrient balancer prototype: an enclosure with dosing pumps, tubing, control electronics and a sample cell holding four ion sensors
Photo of the sensor and sampling system.

Lab testing vs. Ikei

Lab testing todayWith Ikei
How often you see ion levelsAbout once a weekEvery cycle, on-site
Who fixes the solutionStaff, by hand, after reading a reportAutomatic, precise dosing
When an imbalance is caughtOften too late, so the tank gets dumpedEarly, while it's still small
Testing costUp to $50,000 in lab feesTarget: half the cost
Four Ikei solid-contact ion sensors: green strips with a round black sensing membrane at the tip

Ikei solid-contact ion sensors

The core technology

A tough, low-cost sensor made for farms, not labs.

Lab ion probes are fragile, liquid-filled and need constant care. Ours are solid-state sensors built on graphene, designed for mass production without precious metals.

Typical lab probe

  • Liquid-filled electrodes
  • Must be stored wet and refilled
  • Short shelf life, lots of upkeep

Ikei sensor

  • Solid-state, graphene-based
  • Stored dry, ready to install
  • Little routine maintenance

±10%

Field-tested against the gold standard

In recent tests at an academic research farm, Ikei sensor readings came within 10% of the industry's gold-standard laboratory method.

~10×

longer shelf life, because it's stored dry

~$5

target cost to make each sensor

2

patent families protecting the sensor and reference electrode

Who it's for

Commercial hydroponic and vertical farms.

  • Year-round crops
  • Local supply
  • Resilient harvests

What it means for a farm

More yield. Lower costs. Less time at the tank.

+5%

Crop yield

Every nutrient stays in range, every day.

−50%

Testing cost

On-site readings replace most lab samples.

−15%

Water and fertilizer

Fix the solution instead of dumping it.

Less

Skilled labour

No one has to interpret lab reports.

These are our targets. We are validating them now in controlled lab trials and with partner farms, and will publish measured results as trials finish.

For growers

Run a pilot on your farm.

We're choosing commercial hydroponic and vertical farms for pilot installs over the next year.

  • A balancer installed on your reservoir
  • Online dashboard with nutrient trends and alerts
  • Yield and savings measured against how you work today
Apply for a pilot

For investors

We're raising $300K CAD.

This round takes us from lab trials to installed systems at partner farms over the next 18 months.

$15Bglobal hydroponic produce revenue
8%yearly growth, 2026–2033
  • Hardware sale plus a recurring service subscription
  • Sensors within 10% of the lab gold standard in farm tests
  • Letters of intent from partner farms
  • Patented core technology from McGill
Request the investor deck

Team

Sensor science, electronics and farm know-how.

Minh Tran

Minh Tran, PhD

Founder & CEO

PhD in Electrical Engineering from McGill, specializing in electrochemical sensors.

Vladimir Bessonov

Vladimir Bessonov

Co-founder & Embedded System Lead

B.Eng. in Electrical Engineering. Builds the hardware, firmware and data platform.

Garvit Bhatt speaking into a microphone at a McGill event

Garvit Bhatt

Customer Development

Pharmacology PhD researcher passionate about connecting with growers and industry partners.

Prof. Thomas Szkopek

Prof. Thomas Szkopek

Scientific Advisor

McGill professor and expert in carbon and 2D materials.

Contact

Let's grow smarter.

Tell us about your farm or your fund. We reply within two business days.

info@ikeis.ca
GET IN TOUCH · IKEI SYSTÈMES

Let's talk.

Tell us a little about yourself.

This opens a draft in your email app. Review it and click Send there — the website does not send it automatically.